Fully automated 12 head weigher/filler

Weighing and bagging from 0,8 kg to 25 kg bags.

Model: CW12/2 plus BSM bagging equipment

Weighing and packing line with a multi-head electronic weigher and a JN-ZK1 bagging machine.

This weighing and packing installation for onions, potatoes, carrots and other similar produce consists out of:

• in-feed elevator, the gray box at the right. The infeed elevator has to be wide to be able to supply all ten weigher heads with product.
• multi-head electronic weigher CW12.
• 1 bagging machine for single bags BSM3, but this installation also works with two baggers.

This installation is capable to bag bags of 0.8 kg to 25kg.

Because of the multi-head weigher this installation is suitable to weigh and bag bags as small as 0.8 kg with relative big products, like onions, potatoes or root beets. The WHY is explained here: weighing principles.

As can be seen in the picture the product has to fed into the very wide hopper to guarantee the filling of the 10 weigher hoppers by an very wide in-feed elevator. After weighing the product goes to a bagging machine called ''Bagmaster''.

Capacities:

The single bagging machine starts being a restriction on the capacity for bags smaller than 2 kg. It is advisable to employ different packing equipment for weights below 2 kg.

The bigger the bags the higher the capacity.

• Mash bags of 25 kg: 1.200 bags per hour or 30.000 kg per hour.
• Mash bags of 10 kg: depends on the bagging equipment.
• Mash bags of 0.8 kg: depends on the bagging equipment.

Weighing and packing line with a multi-head CW12/2 electronic weigher and two bagging machines

Bagmaster bagging equipment.

The lay-out of a possible configuration of the installation.

Here the CW 12/2 multi-head weigher has, in this lay-out, two bagging machines: a JN-ZK1 and a BSM3.

Dimensions 4.710 m by 8.070 m.

IMPORTANT: Other packing materials are also possible. It is perfectly okay to place box packing installation or a paper or plastic bag filler at the outlet of the weighing machine.